Add a 4G camera
The 4G wall camera and the solar wall camera use a SIM. Insert the card, then add the model printed on the body.
About 3 min · 3 steps
Before you start
- A SIM with data
- ZigeLink installed
- C200 plugged in; CS200 with its battery and solar panel fitted
- 1 / 3
Insert the SIM
Seat the SIM as the body label shows, then finish the steps in the box.
- 2 / 3
Apply power
Plug C200 into power. CS200 runs on its battery and solar panel.
- 3 / 3
Add the device
In ZigeLink, pick the model printed on the body label.
Having trouble?
No signal
Confirm the SIM has data. These cameras connect over 4G. Point the solar panel at open sky.
Reset, LED status, mounting angle, and missing alerts live in Help. →