Connect via AP hotspot
The camera opens a hotspot; the phone hands over your Wi-Fi password.
About 5 min · 5 steps
Before you start
- ZigeLink installed
- Power applied as the body label describes
- 2.4 GHz Wi-Fi for single-lens models
- 1 / 5
Apply power
Follow the body label. Screw a bulb camera into the local lamp base, and plug in a desktop or wall camera.
Continue once the indicator is ready to pair. Place a bulb camera where the room is already lit.
- 2 / 5
Open the app
In ZigeLink, tap Add device and pick this model.
- 3 / 5
Join the hotspot
Connect to the Zige-XXXX hotspot when prompted.
- 4 / 5
Choose home Wi-Fi
Choose 2.4 GHz for a bulb or desktop camera. Dual-lens Wi-Fi cameras work on Wi-Fi 4 or Wi-Fi 6. If the router is 5 GHz only, turn 2.4 GHz on first.
- 5 / 5
Wait until online
A solid blue LED means success. Live view should appear.
Having trouble?
Hotspot not listed
Hold Reset for 5 seconds and turn off VPN on the phone.
Wrong password
Use a Latin SSID and password, then retry.
Reset, LED status, mounting angle, and missing alerts live in Help. →